North Carolina Certified Applicator Termite Practice Exam

These questions are part of the practice quiz. Start practicing

• What environmental condition promotes the growth of brown rot?
• According to NC regulations, what depth is required for establishing a continuous termiticide barrier?
• The true powerpost beetle is the?
• To prevent or control growth of fungi in wood, what is the maximum wood moisture content recommended?
• What action should be taken if wood-destroying organisms are found during an inspection?
• For guaranteed treatments of powderpost beetles, the initial liability period regarding active infestations is how many months from the original treatment date?
• What do wood boring beetles primarily depend on for survival?
• What is cellulose?
• Which is the most common termite species found in North Carolina?
• Where is a frequent inspection area inside the structure for termite presence?
• What is 'termite baiting' primarily used for?
• What type of damage is specifically associated with the Anobiid beetle?
• What should be done if termite activity is found during an inspection?
• After 3 to 5 years, how many termites are typically found in a mature colony?
• Which pheromone attracts other termites to a food source?
• How far will carpenter ants forage from their nests?
• Which wood destroying insect is often confused with termites?
• Where are structural infestations by anobiid beetles most common?
• Which statement regarding molds is true?
• Why might untreated wood be more susceptible to pests?
• What is the correct term for termite treatment that prevents infestation?
• What is a common time for the swarming behavior of termites to occur?
• What is the application method for liquid termiticides?
• What kind of damage do winged reproductive termites cause?
• Why is it important to use treated wood in construction?
• Which termite species is not typically found in North Carolina?
• Which of the following is NOT a sign of termite infestation?
• The breakdown rate of a pesticide in soil primarily depends on what factor?
• What does the term "wood-decaying fungus" refer to?
• What do subterranean termites need to survive?
• What type of insect larva leaves ripples in the surface of galleries?
• What is one common place to inspect for termites on the outside of a structure?
• Which insect is known for causing damage primarily in damp or decaying wood?
• What is a common sign of carpenter ant activity?
• Moisture content readings of 20, 23, and 25 percent in wooden members of a structure suggest what action?
• According to NC structural pest control law, when must a licensee apply for a registered technician identification card for new non-certified employees?
• How do termites communicate with one another?
• Are stumps classified as cellulose debris in a crawlspace?
• What is the primary role of the queen termite within a colony?
• When external slabs prevent trenching, how far apart can rod holes be placed?
• Which species of termites is most common in North Carolina?
• After one year, how many termites can a subterranean termite colony contain?
• What is the purpose of a soil treatment in termite control?
• What are the two main methods used for inspecting a property for termites?
• Name a common method used to treat moisture problems in homes.
• Which of the following could be an independent source of moisture leading to termite infestation?
• What is the primary difference to identify between winged termites?
• What type of bait systems are commonly used for termite management?
• A rhythmic rasping or clicking sound in structural wood is indicative of what?
• Which condition is known to promote termite infestations?
• ______ frass contains bun-shaped fecal pellets.
• Which area is commonly checked for termite activity next to kitchens and bathrooms?
• Which of the following visual signs may indicate past termite activity?
• An example of a termiticide that is used for soil treatment is:
• Which type of beetle is typically involved in wood damage?
• Do carpenter ants attack sound, dry lumber?
• What is a key advantage of liquid termiticides over bait systems?
• Which wood destroying pest makes round exit holes?
• What characteristic distinguishes termites and ants in terms of body structure?
• What is a common reason for termite damage to be overlooked in homes?
• How would you describe the hole made by a carpenter bee?
• What might be an indicator of an effective termite treatment?
• What are the primary physical differences between carpenter bees and bumblebees?
• What should local treatment of drywood termites include?
• What is the purpose of the North Carolina WDIR 100 report?
• What chemical was historically used for termite control but is now banned?
• What is a physical difference between ants and termites?
• What is the lifespan range of the old house borer?
• Which insect larvae are known to produce frass that is fine powder and pellets?
• What technique should a pest control professional use to avoid contaminating drinking water while applying termiticides?
• What is the optimum time for adult powderpost beetle activity in North Carolina?
• What is the benefit of using kiln-dried wood in structures?
• What precautions should be taken when applying termiticides?
• What does carpenter ant excavated galleries look like?
• What environmental factor is essential for the survival of termites?
• What physical sign can indicate a termite infestation?
• In terms of tree classification, what do hardwoods typically lose in the fall?
• Which termiticide is not typically used for soil treatment?
• Which regulatory body is responsible for overseeing pesticide application in North Carolina?
• What structural problem usually indicates an active infestation of wood-destroying pests?
• Pesticides are more likely to reach groundwater in which type of soil?
• Which of the following can be a physical barrier to prevent termites?
• Is it acceptable to apply less than the label rate during a termite pre-construction treatment?
• What kind of barriers can be installed during construction to prevent termites?
• How deep must trenching and rodding treatments extend?
• Name one proactive measure homeowners can take to prevent termite infestation.
• Which of the following actions can help reduce the risk of termite invasion?
• Deviations from the minimum requirements for sub termite control must be corrected within what time frame?
• Which group of trees is characterized by having needles and cones?
• What is one benefit of using baiting systems over liquid treatments for termite control?
• What moisture content percentage do carpenter ants prefer?
• What must all application equipment used for wood destroying organism pesticides be equipped with, except for small air compressed sprayers?
• What does the term “Subterranean” refer to concerning termite types?
• What distinct feature do soldier termites possess?
• Which of the following are the three main castes in subterranean termite colonies?
• What do fecal pellets from drywood termites resemble?
• Which statement is true regarding the antennae of ants and termites?
• What environmental condition should be monitored to prevent subterranean termites?
• What is the most common source of water problems in unventilated crawl spaces?
• How does the head shape of Eastern Sub and Formosan termite soldiers differ?
• Which layer of a tree is responsible for secondary growth?
• What type of wood do drywood termites typically feed and nest on in North Carolina?
• True or False: Evidence of wood destroying organisms must not be removed during a WDIR-100 inspection.
• What organism in the hindgut helps termites break down cellulose?
• Which of the following practices can aid in early detection of termites?
• How deep should termiticides be applied in the soil?
• What does Lyctid Beetle damage look like?
• What type of pesticide is chlorpyrifos classified as?
• Which two types of slabs are typically equipped with perimeter expansion joints?
• Which of the following is a primary component that termites feed on?
• Carbamate and organophosphate pesticides inhibit which enzyme in the human nervous system?
• In which situation would trenching be used for termiticide application?
• What characteristic is common among all types of termites?
• What characteristic of foams enables them to dispense uniformly under slabs?
• What is one method to treat a dirt-filled porch?
• What is the first piece of wood that is attached to the foundation wall called?
• Which factor most affects the efficacy of a termiticide?
• Lyctid beetles primarily attack _______ wood. While Anobiids primarily attack ________ wood.
• How many eggs does a mature queen termite lay per year?
• What is the smallest crack through which termites can enter?
• According to NC Structural Pest Control Committee Rules, where must restricted use pesticides NOT be stored?
• What is the primary purpose of monitoring stations used in termite management?
• A "deficient" soil sample contains how much termiticide when applied at the lowest labeled rate according to NC Structural Pest Control Committee Rules?
• What structure do termites primarily feed on?
• Where is a carpenter ant queen most commonly found?
• What is the proper disposal method for containers of termiticides?
• When treating for subterranean termite infestations in a structure, voids in multiple masonry foundations must be drilled and treated at a minimum distance of how many feet?
• What is the most common type of decay fungi found in wood in houses?
• What is the general recommendation for the control of ambrosia beetles found in structural wood?
• What type of wood is most susceptible to termite damage?
• How many CEUs must a licensee earn to be recertified in any two phases of structural pest control in North Carolina within a five-year period?
• What is the best method for controlling carpenter bees?
• Why is it important to follow label instructions when applying pesticides?
• What is the primary role of the soldier termite?
• What is the primary role of worker termites in a colony?
• What is the required form for reporting the presence or absence of wood-destroying insects in structures for sale?
• What is the temperature range that can be effective for termite control through heat treatment?
• Under ideal conditions, how long can a queen termite live?
• Which type of trees usually lose their leaves in the fall and produce seeds enclosed in fruit or nuts?
• What is the name of the concrete pour that supports the foundation wall?
• Most basements would be classified as what kind of slab?
• In termite control, what does the term “retreatment” refer to?
• What is the physical appearance of a worker termite?
• What factor could cause a termiticide barrier to degrade over time?
• Are carpenter ant colonies primarily indoor or outdoor?
• In what situation would a termite inspector need to recommend fumigation?
• What minimum distance should all voids in bearing walls be treated from evidence of subterranean termite infestations?
• What type of termite is most commonly found in structural wood?
• Which materials should be avoided in landscaping to help deter termites?
• In terms of lifecycle, how long does it take for a termite egg to hatch?
• Why do adult bostrichid beetles bore into wood?
• Which wood destroying insect causes damage in soft areas of wood and doesn't follow the grain?
• What must be submitted if there are deviations from specified termite treatment standards?
• What is the inner part of a woody stem made of dead cells known as?
• What does Integrated Pest Management (IPM) involve in the context of termite control?
• What is the economic cost of termite damage in the United States annually?
• What is the layer between the inner bark and the sapwood called?
• Which of the following tools is NOT typically used for inspecting termites?
• Where should an inspector focus their examination inside a crawl space?
• What is a key indicator of a potential wood-destroying insect infestation?
• Which type of termite is known for its above-ground nests?
• Should inside vertical barriers and outside vertical barriers be implemented simultaneously in pre-construction termite treatments?
• True or False: If a treatment is performed with a WDIR-100, a copy of the written agreement and warranty must be included with the report.
• What are sub-structural inspections primarily concerned with in termite treatments?
• What is a common method to monitor termite activity?
• What is typically the first step in a termite control program?
• Which sign may indicate termites are present in a structure?
• Why is moisture control critical in preventing termite infestations?
• If a King and Queen mate to start a new colony, how many eggs will they initially produce?
• Which method can help in monitoring termite activity over time?
• During a termite inspection, what should an applicator check for?
• Which of the following is NOT a type of wood boring beetle?
• When are termites most likely to swarm?
• Most structural lumber is classified as which type of wood?
• Which of the following is NOT a type of slab construction?
• How many trips are generally required for a pre-construction termite treatment?
• What type of termite is typically associated with the presence of carton nests?
• What do most termite baits contain?
• Which wood treatment method is effective in preventing termite damage?
• Which type of slab construction does not have a separate footing?
• Which of the following would NOT be an effective tool for a termite inspection?
• Metallic Woodborer, borisa beetle, and bark beetle are examples of what type of beetle?
• For how long must inspection and treatment reports be retained?
• What is the most effective preventive measure against wood rot in buildings?
• What can be a direct consequence of untreated termite damage?
• During which months are termites most active in North Carolina?
• How can structural wood be protected from termite damage?
• What are formed when a portion of a carpenter ant colony moves indoors while the main colony remains outside?
• Which type of trees have cones and needles?
• What characteristic distinguishes ants from termites?
• Termite treatments are generally ineffective in which of the following construction types?
• What is one of the most effective ways to prevent termite infestations?
• Pesticides carried in structural service vehicles operated in North Carolina must contain which of the following?
• Which factor might increase the likelihood of pest infestation in homes?
• What is one way to prevent termite infestations in new constructions?
• What does very fine wood frass beneath structural wood and pinhole openings in the wood surface indicate?
• What is the limitation of a structural pest control operator with an inactive license?
• Which type of debris is not considered when assessing wood debris and cellulose material in crawl space areas?
• Which of the following is commonly damaged by powderpost beetles?
• True or False: Heartwood generally has a greater resistance to insect attack and decay than sapwood.
• What is the primary characteristic that differentiates fungi from green plants?
• What is the classification of any violation of the provisions of the North Carolina Structural Pest Control Law?
• What is a key treatment method recommended for controlling drywood termites?
• What is one of the main benefits of wood preservation treatments?
• Imidacloprid belongs to which chemical class?
• Which locations are common places to find an indoor carpenter ant nest?
• Why should carpenter bee holes not be plugged immediately after insecticide treatment?
• Which factor plays a crucial role in the growth of wood decay fungi?
• In which type of construction is conventional liquid termite treatment NOT recommended?
• What material should gloves worn to prevent pesticides from contacting hands be made of?
• What is an important factor in controlling termite populations?
• What is the maximum civil penalty the NC Structural Pest Control Committee may impose?
• What is often the primary concern regarding wooden structures and their proximity to the ground?
• What is the primary purpose of a termite inspection?
• What is a common method of inspection for termite presence?
• What is one benefit of early detection of termite infestations?
• What is a common misconception about termite damage?
• What is the recommended treatment method when encountering backfilled soil in a trench?
• Are carpenter ants always black in color?
• True or False: Pelleted wood frass attached to joists or headers is considered visible evidence of termites.
• Fungi cannot produce their own food because they do not contain which of the following?
• Inspecting joints is crucial when searching for termites in what area of a building?
• What are swarmers in the context of termites?
• Which statement is true regarding wood moisture content and wood boring beetles?
• Are surface molds or mildew fungi capable of weakening wood?
• In terms of pesticide application safety, which of the following materials should always be utilized?
• Which common source allows wood destroying insects to enter indoors?
• What is one of the main functions of worker termites in a colony?
• Where should a properly installed flow meter be located in a large volume sprayer system?
• What is the primary activity of drywood termites?